Epoxy Adhesives


Two-part engineering adhesives provide high strength, structural joints. They are suitable for bonding metals, ceramics, wood and some plastics and they are supplied in a practical dual cartridge dispenser. Curing occurs upon mixing of the two components (resin and hardener). Fixture time is from 5 - 10 minutes to several hours. Applying heat will accelerate the cure speed. Temperature resistance is between -30°C and +80°C, +120°C for some products.

Two-part Epoxies
Product Number Colour Handling Time (min.) Functional Cure Time Shear Strength
N/mm²
Peel Strength
N/25 mm
Description/ Suggested Applications
  31-10 AMBER 90 - 150 (*) 12 - 24 h 12 - 14 10 - 25 Slow curing, tough bond TDS
  31-40 COLOURLESS 10 - 20 (*) 30’ - 40’ 10 - 12 4 - 20 Fast curing, colourless, non yellowing. TDS
  31-42 COLOURLESS 3 - 8 (*) 20’ - 30’ 12-14 4-20 Very fast curing, colourless, non yellowing. TDS
  32-43 TRANSLUCENT 7 - 10 (*) 10’ - 20’ 10-14 - Fast curing, flexible, non-sag for ease of use on vertical surfaces. TDS
  34-15 IVORY 15 - 35 (*) 12 - 24 h 5-10 40-70 Longer setting time, very flexible, high peel and impact resistant. TDS
  35-44 COLOURLESS 10 - 20 (*) 40' - 60' 5-9 25-60 Fast setting, very good peel resistance, excellent adhesion to metals. TDS
  36-10 AMBER 90 - 150 (*) 12 - 24 h 12-18 25-40 Slow curing, tough, flexible. TDS
  3614 GREY 30 - 50 (*) 3 - 4 h 15-25 40-70 Very Tough, Highly  viscous, structural bonding TDS
  4401 GREY 15-25 24 - 36 h 20-30 150 - 300 (**) Tough, semi-flexible, temperature resistant up to +120°C, peaks at +140°C. TDS
  44-28 IVORY 10 24 - 36 h 18-22 150-200 Toughened, medium/high viscosity, ideal for composites bonding, temperature resistant up to +120°C. TDS
  4429 BLACK 120 24 - 36 h 18-22 200 Toughened, semi-flexible, high temperature resistant, non-sag for ease of use on vertical surfaces. TDS

Two-part modified flexible Epoxies

Product Number Characterstics Colour Handling Time (min.) Functional Cure Time Shear Strength N/mm² Peel Strength N/25 mm Description
   4807 FLEXIBLE GREY 10-20 7 days 4-10 60-80 Flexible, high temperature resistant, ideal for fiberglass and metal frames. TDS
  4820 SELF LEVELLING BLACK 25-50 72 h 4-7 - Self-levelling, ideal for plastics such as PA, PC, ABS, PET, PMMA, PI, metals, ceramics and composites. TDS
  4821 TOUGH/FLEXIBLE BLACK 10-15 72 h 4-7 60-80 Toughened, flexible, suitable for plastics such PA, PC, ABS, PET, PMMA, PI, metals, ceramics and composites. TDS
  4826 THERMAL CONDUCTIVE IVORY - 72 h 1-2 - Self-extinguishing, thermal conductive, high temperature resistant up to +120°C and peaks up to +150°C. TDS
Single-Part Epoxies (Structural, Heat Curing)
Product Number Colour Viscosity (+25°C Pa s) Handling Time Shear Strength
N/mm²
Peel Strength
N/25 mm
Temperature Range (°C) Description
   4500 GREY 800 - 3800 THIXO 30 - 45 (*) 20-30 80-120 -40 +180 High viscosity, non dripping, high tensile, peeling and shear strength. Fills large gaps. TDS
  4580 GREY 150 - 250 THIXO 45 - 60 (*) 18-25 80-120 -40 +180 Medium viscosity, self-levelling, fluidifies during hardening. TDS
  4620 WHITE 15-30 30 - 45 (*) 18-25 - -40 +180 Low viscosity, self-levelling. TDS
  4680 IVORY 60-100 15 - 30 (*) 20-25 - -40 +180 Medium/high viscosity, high impact strength, for bonding ferrite and magnets. TDS
  4690 BLACK 200 - 300 THIXO 45 - 60 (*) 18-25 80-150 -40 +180 Medium/high viscosity, high tensile, peeling and shear strength. Non-drip. TDS
  4700 AMBER 8-12 60-90 (at +90°C) 15-25 - -40 +180 Fluid, self-levelling, general purpose. Curing at +90°C. TDS
  4780 BLACK 400 - 600 THIXO 30 - 45 (*) 15-25 - -40 +180 Thermal conductive, medium/high viscosity. Ideal for applications that require fast heat conduction. TDS

Note:

  • (*) Time detected on a 2 g total mass mixture A + B
  • (**) With hot curing for 60 minutes at +80
  • Loxeal is a registered trademark of Loxeal Srl, Italy
Top