Instant Adhesives


Cyanacrylate adhesives are for instant and structural bonding of rubber, metals, ceramic, leather and a variety of plastics. Best results can be obtained with joint gaps of less than 0.1mm up to 0.2mm for special grades.

The service temperature range is between -50°C and +80°C, although new high-temperature resistant formulations are available for use up to 180°C. For porous surfaces or for vertical application a gel grade is available.


Grade Viscosity Speed of Cure* Tensile Strength Shear Strength Description/ Suggested Applications
   IS - 14 80-150 2 25-30 20-25 (1) For rigid materials, like rubber-metal. Slow setting. High strength. TDS
   IS - 17 1200-1800 1 25-30 20-25 (1) High viscosity, for rigid materials, fills large gaps, slow setting, high resistance. TDS
   IS - 23 40-80 3 12-25 13-18 (2) General purpose for rubbers and plastics. Medium setting. TDS
   IS - 25 350-450 3 15-23 13-20 (1) Fills large gaps, for rubbers, plastics, metals and ceramics. TDS
   IS - 27 1200-1800 2 18-25 13-18 (1) High viscosity, for rubbers, plastics, fills large gaps. TDS
   IS - 29 500-1500 1 18-25 13-18 (1) General purpose, elastomeric, flexible. TDS
   IS - 32 5-10 5 12-25 13-18 (2) Very fast curing. Very good results on EPDM and foam rubbers, difficult rubbers and plastics. TDS
   IS - 34 10-30 5 12-25 13-18 (2) Very fast curing. Very good results on EPDM and foam rubbers, difficult rubbers and plastics. TDS
   IS - 37 1000-2000 3 12-25 16-20 (1) Flexible, mid/high viscosity, high impact strength, for rubber, plastic, metals and ceramics. TDS
   IS - 41 5-10 5 18-25 13-18 (1) Low viscosity, fast setting on acidic surfaces. TDS
   IS - 43S 80-150 5 15-25 15-20 (1) General purpose, faster setting on acidic surfaces, for leather, wood and metals. High temperature resistant up to +120°C. TDS
   IS - 45 600-1200 4 12-25 12-20 (1) Medium viscosity, general purpose, fast setting on acidic surfaces. TDS
   IS - 47 GEL 2 18-25 13-18 (1) Gel, fills large gaps, for vertical bonding and porous surfaces. High temperature resistant up to +120°C. TDS
   IS - 48 2000-2500 THIXO 2 18-25 13-18 (1) Fluid gel, to bond porous and vertical surfaces, recommended for assembly lines. TDS
   IS - 52 80-110 2 18-25 18-25 (1) General purpose, for assemblies subjected to temperature up to +180°C. TDS
   IS - 55 600-1000 2 18-25 13-18 (1) General purpose, for assemblies subjected to temperature up to +130°C. TDS
   IS - 63 80-150 1 10-25 12-22 (1) General purpose, odor free, non-blooming. TDS
   IS - 67 1000-1500 1 10-25 12-22 (1) High viscosity, fills large gaps, odor free, non-blooming. TDS
   IS - 73 100-200 2 12-25 15-25 (1) General purpose, flexible, transparent, high temperature resistant up to +100°C. TDS
   IS - 74 100-200 2 12-25 15-25 (1) General purpose, flexible, high temperature resistance up to +100°C. TDS
   IS - 75 4000-5000 2 12-25 15-25 (1) Tough, viscous, high peel and impact resistant, general purpose. TDS
   IS - 77 2000-4000 2 12-25 15-25 (1) Tough, flexible, viscous, high impact resistant, high temperature resistant up to +120°C. TDS

(*) Relative setting time (5= max, 1 = min.)

Note:

  • Loxeal is a registered trademark of Loxeal Srl, Italy
Top