Structural Acrylic Adhesives


Two-component adhesives cure by contact (drop on drop, bead on bead). Curing time from 1 to 5 minutes. Suitable for bonding metals, ferrite, ceramics, wood and some plastics forming high strength durable joints with high impact, peel and tensile strength.




Product Number Handling Time (Min) Functional Cure (Min) Shear Strength Peel
Strength
Description/ Suggested Applications
  30-55 (+Att. 20) 1-4 30-60 15-25 85-100 High viscosity. General purpose. TDS
  33-00 (+Att. 20) 1-4 30-60 15-30 45-65 Medium viscosity. General purpose. TDS
  33-47 (A+B) 1-3 30-60 8-20 45-65 Low viscosity. For bonding metals, ceramics and plastics. TDS
  33-47M 1-3 30-60 12-25 45-65 Fluid, metals, ceramics and plastics bonding. TDS
  3362 4-7 10-12 15-20 - Two-components, toughened, low viscosity, low odor. For bonding plastics, metals, ceramics, fiberglass, and their combinations too. TDS
  3439 (+Att. 20) 20-50 seconds 10-20 20-30 85-100 Fluid, high shear, peeling and impact strength, ideal for magnets, ferrites, metals and ceramics. High temperature resistant up to +165°C. TDS
  3452 2-3 8-10 19-21 - Two components, toughened, low viscosity and low odor. High impact and peel resistance. TDS
  3459 (+Att. 20) 20-40 seconds 10-20 20-30 85-100 Gel, high shear, peeling and impact strength, ideal for magnets, ferrite, metals and ceramics. High temperature resistant up to +165°C. TDS
  3460 2 - 4 24 hours >4 - Two-components, for bonding PP, PE, HDPE, LDPE, Polyolefins, copolymers, PTFE, EPDM among them and in combination with other plastics such as ABS and PVC and to metals (aluminium) as well. TDS
  3461 5 - 8 36 - 48 hours >4 - Two-components, for bonding PP, PE, HDPE, LDPE, Polyolefins, copolymers, PTFE, EPDM among them and in combination with other plastics such as ABS and PVC and to metals (aluminium) as well. TDS
  3592 (A+B) <1 10-20 20-25 - Structural bonder curing by contact, drop on drop or bead on bead. No mixing required. Setting time 10-30". Ideal for bonding of magnets and ferrite on high speed assembly lines. TDS

Note:

  • Shear strength in N/mm² , ISO 4587,
  • Peel strength in N/25mm, ISO 4578
  • Loxeal is a registered trademark of Loxeal Srl, Italy
Top