Loxeal IS – 32
Rapid cure Cynoacrylate for elastomers
| Applications |
|
| Replaces | Solvent Bonding, Ultrasonic Welding |
| Available pack size | 20gm, 50gm, 500gm |
| Standards | ASTM, DIN, ISO, REACH, RoHS |
| Related Accessories (Click image to explore more) |      |
Specifications
| Chemical Composition | Ethyl Cyanoacrylate |
| Curing Mechanism | Moisture |
| Color | Clear/ Colourless |
| Viscosity | 5 - 10 mPa s |
| Recommended substrates | Fast bonding of EPDM, foam rubber, difficult to bond rubber, soft/plastic. |
| Max gap fill | 10 - 40 microns |
| Fixture Time (secs) | ABS : 2 - 10, Steel : 10 - 20 |
| Shear Strength | 13 - 18 N/mm2 |
| Tensile Strenth | 18 - 25 N/mm2 |
| Service Temperature | -50°C/+80°C |
Features and Benefits
| Loxeal IS 32 is very fast curing cyanoacrylate adhesive. | |
| Especially used on rubber parts such as EPDM for fast fituring. |
Notes
- Use this product on rubber, foam and plastic substrates for best results.
- Not the best product when joining metal parts, though provides very good bond on small parts.
- When bonding PE, PP, HDPE, LDPE, Silicone rubbers or PTFE Loxeal Primer-7 is always recommended.
- In case of too long setting time it is recommended to use Loxeal Activator 9.
