Its all about forming a bond

Elixir is all about providing comprehensive adhesive solutions and solving design problems our customers face.We are forming bonds that will last a lifetime.

Engineering Adhesives

Technically advanced and globally recognized, Loxeal engineering adhesives have been solving assembly problems for manufacturers since eighties. As the distributors of Loxeal in Indian subcontinent, Elixir is offering its expertise in application engineering and comprehensive adhesive solutions to customers from wide range of industries. Our products are recognized for their performance at the highest level and coupled with our commitment towards customer service, you can be rest assured of your project’s success.

Threadsealants

Anaerobic threadsealing adhesives seal and lock threaded pipe joints & fittings against pressure of gas, air, water, oils, hydrocarbons and many chemicals.

Explore >>

Threadlocking

Threadlockers

Loxeal anaerobic threadlockers lock studs,nuts,screws and other threaded fasteners from loosening caused by vibrations,impact and mechanical or thermal shocks.

Explore >>

Adhesives-Gasketing

Liquid Gaskets

Loxeal liquid gaskets seal flat mating surfaces and join flanges in pumps,gearboxes,compressors and differential housings of any shape and dimension in an easy and very effective way.

Explore >>

Retaining Compound

Loxeal retaining compounds lock and fit bushes, bearings, sleeves, pin hubs, pulleys, gears and other cylindrical components.

Explore >>

Instant-adhesives

Instant Adhesives

Instant adhesives are one component, room temperature, rapid cure products. They achieve handling time in seconds, making them highly versatile for a range of application especially involving plastics, elastomers and small rigid parts.

Explore >>

Adhesive surface preparation

Surface preparation or Surface conditioners are a special set of products formulated to enhance the performance of Loxeal adhesives in unfavourable circumstances such as large gaps.

Explore >>

epoxy-adhesive

Epoxy Adhesives

Loxeal epoxy adhesives are structural adhesives with high mechanical resistance. Because of their ability to bond wide range of substrates, high strength and chemical resistance, they are widely used worldwide.

Explore >>

Light curing
UV adhesives

Loxeal light curing adhesives are one component UV adhesives that cure on demand when exposed to suitable UV radiations.

Explore >>

Structural Acrylic Adhesives

Loxeal acrylic adhesives are structural adhesives with high peel and impact resistance while curing rapidly at room temperature.

Explore >>

Methacrylate-adhesives

Methacrylate Adhesives

Methyl Methacrylates are structural strength adhesives suited for applications requiring dynamic load bearing, high impact and vibration resistance.

Explore >>

Complimentary Products

Our complimentary products are a range of chemical based products that solve some of the tough everyday challenges of manufacturing industry.

Explore >>

Sealants

When you need high quality sealing solution for wide range of applications in assembly or building component production,Elixir is the source you can depend on for the continuous improvement and enhancement of joint sealability. From Silicone to PU and MS Polymer, our products form a complete solution for every possible application.

Polyurethane Sealants

Sikaflex range of one component Polyurethane sealants are moisture curing and elastomeric sealants that can adhere to a very wide range of substrates.They are widely used in both vehicle and industrial applications for weatherproofing and sealing.

Explore >>

Modified Silane (MS Polymers)

Sikaflex range of one component modified silanes are a new generation of silane terminate sealants that are moisture cure and can be used both as sealant and assembly adhesive.They need fewer surface preparation than Silicones and Polyurethanes and can be painted.

Explore >>

RTV Silicones

Our one component silicones are moisture cure room temperature vulcanizing sealants used primarily as a sealant for leak proof joints and excellent weather resistance.They can also withstand high temperature resistance upto 300°C and are thus recommended for applications requiring high thermal resistance.

Explore >>

Surface Preparation

Our surface preparation products consist of a range of Activators, Primers, tooling agents that help improve the overall performance of RTV Silicones, Polyurethanes and Modified Silanes.

Explore >>

ADoST

ADoST is a brand of adhesive dosing systems designed and manufactured by 1K2K. It is carefully designed to increase efficiency, reduce waste and enhance safety through the thoughtful design behind ADoST. Conceptualized after extensive end user collaboration, ADoST’s smart and ergonomical design stands out for maximum efficiency and comfort.

ADoST PPS

The ADoST PPS NXT is an electro pneumatic precision dispensing system designed for the application of Anaerobic, Cyanoacrylate and UV adhesives. This unit is designed to be used on high speed automotive assembly lines as well as batch production of medical devices.

Explore >>

ADoST-CDS-pro

ADoST CDS

AADoST CDS is an advanced cartridge dispensing system designed and developed to apply fixed volume of adhesive in a high-speed production line without having to hold dispenser manually. ADoST CDS improves application efficiency while nearly eliminating worker fatigue.

Explore >>

Handheld Dispensers

When looking for a hand operated adhesive dispenser, talk with our application experts to select the broadest range of manual, pneumatic and battery operated adhesive dispensing caulking guns from Mixpac and Cox. Weather you need a one component epoxy dispenser or dual cartridge acrylic gun, we have them all ready to stock.

Two Component Dispensers

Sulzer Mixpac two component dual cartridge dispensing guns in manual, pneumatic and battery powered format for all your adhesive application needs for 50ml, 200ml and 400ml cartridges.

Explore >>

One Component Dispensers

One component hand operated caulking guns from Sulzer Cox in manual, pneumatic and battery operated models for 300ml and 600ml to 1000ml cartridge and sachet packs.

Explore >>

Static Mixers

Because a long mixer is not always the right solution for your adhesive. Enjoy the benefits of our engineering knowledge about Static Mixers and wide range of application specific ready to stock products.

MIXPAC™ A Series Cartridge Mixer

MIXPAC™ A Series Cartridge Mixer

The Mixpac A type Static Mixers are Bayonet type suited to 50ml, 75ml dual cartridge systems in both Helical and Quadro elements. Mixers with mixing ratios of 1:1, 2:1, 4:1, 10:1 are our standard offerings.

Explore >>

MIXPAC™ B Series Cartridge Mixer

MIXPAC™ B Series Cartridge Mixer

The Mixpac B type Static Mixers are suited to 25mL, 50mL and 75mL dual cartridges in both Helical and Quadro elements.Mixing ratios 1:1, 2:1, 4:1, 10:1 are our standard offerings.Their growing popularity with end users is attributed to its special design that eliminates accidental mixing at the tip.

Explore >>

MIXPAC™ C Series Machine Mixer

MIXPAC™ C Series Machine Mixer

The Mixpac C-System Mixers are designed for 200ml and 400ml cartridges. The unique design allows proper mixing with minimal resistance. In addition MCHX system is designed for 4:1 and 10:1 mix ratio cartridges.

Explore >>

MIXPAC™ F Series Cartridge Mixer

MIXPAC™ F Series Cartridge Mixer

The Mixpac F-System is manufactured to eliminate the challenges of adhesive curing at the tip of cartridge. Available in both Helical and Quadro technology, F Type Mixers have now become a norm for the 200ml and 400ml cartridge in mixing ratios of 1:1,2:1,4:1 and 10:1.

Explore >>

MIXPAC™ ME Series Machine Mixer

MIXPAC™ ME Series Machine Mixer

ME Series are a range of Mixers developed for application of Epoxy and PU through auto dispensing machines in 1:1,2:1,4:1 and 10:1 mix ratios. The mixer element is molded of Polyacetal to withstand higher pressures of meter mix machines. Ø of bell mouth housing 15.9 mm.

Explore >>

MIXPAC™ MS Series Machine Mixer

MIXPAC™ MS Series Machine Mixer

MS Series are a range of Mixers developed for application of Epoxy and PU through auto dispensing machines in 1:1,2:1,4:1 and 10:1 mix ratios. The mixer element is molded of Polyacetal to withstand higher pressures of meter mix machines. Ø of bell mouth housing 16.7 mm

Explore >>

MIXPAC™ Rotary Mixer for Machines (MSR Series)

MIXPAC™ Rotary Mixer for Machines (MSR Series)

Meter Mix Machine mixers for low viscosity 2-component reactive resin systems. Ø of bell mouth housing 16.7 mm.

Explore >>

Accessories

Our comprehensive list of ready to stock accessories make the application and use of adhesives and sealants effecient,effective and aesthetically appealing.

Luer Lock

With Sulzer Mixpac Luer Locks form a sealed connection between static mixer and nozzles for controlled flow of adhesives and sealants.They are available in 5mm, 6mm and 10mm diameter.

Explore >>

Needles

Needles

Use needles and nozzle cones with our luerlock to control the flow of adhesive. They are a great way to optimize adhesive use.

Explore >>

Needle Holder

Needle holders are designed to be used with needles/nozzles directly over Anaerobic or Cynoacrylate bottles to control the flow of adhesive. They are a great way to optimize adhesive use.

Explore >>

Batteries

Batteries

Order spare Li-ion batteries of 10.8V and 18V for both 1-component and 2-component battery powered dispensers

Explore >>

Nozzles

Nozzles

Our wide variety of nozzles are suited to different packing of sealants. Weather you are dispensing a cartridge or sachet, a round bead or flat bead our nozzles get the job done easily and reliably.

Explore >>

Nozzles-Adaptor

Nozzle Adaptor

Our Nozzle adapters are the way to go when you don’t want to use large sized nozzles to apply fine bead and reduce waste.

Explore >>

Spreader

Spreader

Sealant spreaders are patented products designed to be used with most sealants in 300ml cartridge or 600ml sausage to apply over a large surface area in quickest possible time.

Explore >>

Quick Release Coupling

Use these quick release couplings with our air operated 1 component and 2 component dispensers for quick and easy installation.

Explore >>

Battery charger

Battery Chargers

These battery chargers are spares for our 1-Component and 2-Component battery operated hand held dispensers.

Explore >>

plunger kit

Plunger Kits

Plunger kits are spares for 2-Component and 1-Component dispensers.

Explore >>

Mixpac Shrouds

Mixpac Shrouds

Used Along with MS/ME/MSR Machine mixers.

Explore >>