Rapid cure Cynoacrylate for elastomers

Download TDS

Application Tips

Loxeal-IS-32
Applications
  1.  Loxeal IS32 is recommended for applications where very fast fixturing is required, especially bonding of foam, rubber, o-rings, helmet assembly and soft plastics
Replaces Solvent Bonding, Ultrasonic Welding
Available pack size 20gm, 50gm, 500gm
Standards ASTM, DIN, ISO, REACH, RoHS
Related Accessories
(Click image to explore more)		 Loxeal-Activator-9-ra Needle-holder-raLoxeal-Primer-7-rametal-nozzles-needles-for-adhesives-ra (1)

Specifications

Chemical Composition Ethyl Cyanoacrylate
Curing Mechanism Moisture
Chemical Composition Ethyl Cyanoacrylate
Color Clear/ Colourless
Viscosity 5 – 10 mPa s
Recommended Substrates Fast bonding of EPDM, foam rubber, difficult to bond rubber, soft/plastic.
Max Gap Fill 10 – 40 microns
Fixture Time (secs) ABS : 2 – 10, Steel : 10 – 20
Shear Strength 13 – 18 N/mm2
Tensile Strength 12 – 25 N/mm2
Service Temperature -50°C/+80°C

Features and Benefits

Loxeal IS 32 is very fast curing cyanoacrylate adhesive.
Especially used on rubber parts such as EPDM for fast fituring.

Notes

  • Use this product on rubber, foam and plastic substrates for best results.
  • Not the best product when joining metal parts, though provides very good bond on small parts.
  • When bonding PE, PP, HDPE, LDPE, Silicone rubbers or PTFE Loxeal Primer-7 is always recommended.
  • In case of too long setting time it is recommended to use Loxeal Activator 9.