High temperature Cynoacrylate

Download TDS

Application Tips

  1. Loxeal IS-52 is recommended in a wide ranging applications for bonding rubbers, plastics and metals where prolonged heat exposure is required
Replaces Solvent Bonding, Ultrasonic Welding
Available pack size 20gm, 50gm, 500gm
Standards ISO, REACH, RoHS
Related Accessories
(Click image to explore more)
Loxeal-Activator-9-ra Needle-holder-raLoxeal-Primer-7-rametal-nozzles-needles-for-adhesives-ra (1)


Chemical Composition Modified Ethyl Cynoacrylate
Curing Mechanism Moisture
Color Clear/Colourless
Viscosity 50 – 150 mPa s
Recommended Substrates Plastics, rubbers, small metals
Max Gap Fill 10 – 150 microns
Fixture Time (secs) ABS : 10 – 30, Steel : 10 – 30
Shear Strength 15 – 25 N/mm²
Tensile Strength 18 – 25 N/mm²
Service Temperature -55°C +180°C

Features and Benefits

Loxeal IS-52 is low viscosity and relatively faster cure product.
High temperature resistance (180°C)


  • Loxeal IS-52 is primarily used only in high temperature applications involving multiple substrates.
  • In case of too long setting time we recommend to use Loxeal Activator 9.
  • When using to bond PP/PE/HDPE/LDPE/Silicone rubber and other low surface energy substrates it is always recommended to use Loxeal Primer-7