Very high temperature resistance

Download TDS

Application Tips

  1. Loxeal IS 56 is recommended in a wide range of bonding applications involving rubbers, plastics and metals where prolonged heat exposure is required upto 200°C
Replaces Solvent Bonding, Ultrasonic Welding
Available pack size 20gm, 50gm, 500gm
Standards ISO, REACH, RoHS
Related Accessories
(Click image to explore more)
Loxeal-Activator-9-ra Needle-holder-raLoxeal-Primer-7-rametal-nozzles-needles-for-adhesives-ra (1)


Chemical Composition Ethyl Cyanoacrylate
Curing Mechanism Moisture
Color Clear
Viscosity 120 mPa s
Recommended Substrates Plastics, rubbers, small metals
Max Gap Fill 150 micron
Fixture Time (secs) Mild steel: 20, EPDM: 15-45
Shear Strength 15-20N/mm2
Service Temperature -50°C to 200°C

Features and Benefits

It is a single component, solvent free, cyanoacrylate adhesive
The product is relatively slow setting but develops very high final strength on multiple substrates.
Provides excellent strength retention upto 200°C


  • Top choice for high temperature applications
  • Unlike other CynoacrylateThe complete cure of the adhesive is achieved after 24 hours at room temperature hence allowing full cure is very important before testing.
  • In case of too long setting time we recommend to use Loxeal Activator 9.
  • When using to bond PP/PE/HDPE/LDPE/Silicone rubber and other low surface energy substrates it is always recommended to use Loxeal Primer-7