General purpose, Low odour, Non blooming

Download TDS

Application Tips

Loxeal-IS-63
Applications
  1.  The product provides rapid bonding of a wide range of materials, including plastics, elastomers and metals.
  2. Especially suitable to bond substrates and assembly where appearance is very important.
Replaces Solvent Bonding, Ultrasonic Welding
Available pack size 20gm, 50gm, 500gm
Standards ASTM, DIN, ISO, REACH, RoHS
Related Accessories
(Click image to explore more)		 Loxeal-Activator-9-ra Needle-holder-raLoxeal-Primer-7-rametal-nozzles-needles-for-adhesives-ra (1)

Specifications

Chemical Composition Alcoxy- Ethyl Cyanoacrylate
Curing Mechanism Moisture
Color Clear/Colourless
Viscosity 80 – 150 mPa s
Recommended Substrates Plastics, Rubbers, small metals
Max Gap Fill 10 – 150 microns
Fixture Time (secs) ABS : 15 – 40, Steel : 20 – 50
Shear Strength 12 – 22 N/mm²
Tensile Strength 10 – 25 N/mm²
Service Temperature -50°C/+80°C

Features and Benefits

Medium viscous product
Delayed curing allows part adjustment
Low odour non-irritating, non-blooming for appearance-sensitive assemblies

Notes

  • This product is different from general cyanoacrylates in the sense that it is formulated to eliminate whitening effect of general purpose products.

  • It is also no-odour, non-irritating for closed and non-ventilated areas where vapour control is difficult.
  • When bonding PE, PP, HDPE, LDPE, Silicone rubbers or PTFE Loxeal Primer-7 is always recommended.