Low viscous, rapid cure plastic bonder

  1. Particularly formulated to bond plastic substrates where structural strength is desired
  2. Sealing of optical fibre cables
  3. Also bonds metals, ceramics, fiberglass, wood and their combinations
Replaces boltrivetssolderingbrazing
Available pack size 50ml
Standards ISO,REACH,RoHS
Related Accessories
(Click image to explore more)


Chemical Composition Urethane Methacrylate
Curing Mechanism Polymerization on mixing of Part A & Part B
Color Part A :Whitish Part B: Green/Blue
Mixing ratio by volume 1:1 ratio
Recommended substrates Plastics, Metals, Ceramics, Fiberglass & Wood
Maximum gap fill 0.50 mm
Handling cure time 4-7 minutes
Functional Cure Time 10-20 Minutes
Tensile Strength 20-25 N/mm²
Shear Strength Steel: 21 – 23 N/mm²
Service Temperature 40°C to +120°C

Features and Benefits

Low viscous product for applications requiring filling of small crevices, e.g.sealing in optical fiber cables.
Very fast curing <12min fixture time.
Can withstand operating temperature up to 120°C


  • This product can bond a wide range of plastic substrates in combination of many other substrates.
  • Its viscosity allows it to be spread easily over parts, fill holes and crevices etc.
  • It has much lower odour compared to other acrylic adhesives.
  • It is available only in 50ml, 400ml dual cartridges hence require Dispenser and Static Mixer for perfect application.


Metal bonding application using Loxeal 3362 – two part acrylic adhesive

Specifically designed for bonding plastics, it provides good adhesion to metals, ceramics, fiberglass, wood and their combinations too. Fast curing at room temperature, it provides high shear and peeling strength.